Zinc is available from Artazn (Jarden) or Rheinzink, normally as a brite / bright raw finish but others are available. Other thickness, and finishes such as #4, #8 and 2D available as special order items. Stainless Steel in normally available in 24 and 26 gauge 4′ x 10′ sheets, 304 alloy 2B finish. Sierra Tan Buckskin Medium Bronze Please consult the BMC Technical department at for LEED compliance information. Other gauges and alloys are available as special order items. is a coated sheet product that combines the corrosion resistance of Galvalume steel sheet with a clear, organic resin applied to the top side and bottom side of Galvalume substrate. Mill finish Aluminum is commonly stocked in 4′ x 10′ sheets of 0.032″ and 0.040″.
Special order items include 3′ x 8′ sheets and 12″, 15″, 18″, 20″ and 24″ coil stock. It is factory applied to properly cleaned, pre-treated. Lead Coated Copper is available normally in 3′ x 10′ sheets 16 oz. These rich and vibrant colors are produced with either Kynar 500 or Hylar 5000. Kynar 500 resin is polyvinylidene fluoride (PVDF) used as the base resin in liquid paint coatings. Galvanized Steel is available normally in 4′ x 10′ sheets, 24 or 26 gauge.
#Patina green kynar plus#
Galvalume is an Acrylic coated metal, also known as Galvalume Plus or Acrylume. Supplied by KME.įreedom Gray is a Tin / Zinc coated copper from Revere Copper available in coils (normally 18″, 20″ and 24″) and 3′ x 10′ sheets (3′ x 8′ as special order). Pre Patina Copper is available in 3′ x 10′ sheets, 18 oz. Hylar 5000 is a registered trademark of Solvay Solexis.Brass is not an stocked item and is only available as special order.Ĭopper is commonly stocked in 3′ x 10′ sheets, 11.75″, 15″ 18″, 20″ and 24″ coil normally in 16 oz. Kynar 500 is a registered trademark of Arkema Inc. PAC-CLAD is a registered trademark of Petersen Aluminum Corp. 24 Gauge Kynar Standing Seam 26 26 ORDER NOW Kynar Standing Seam 24 GAUGE A more robust metal panel paired with the respected Kynar Paint System takes your roof product offering to the next level. Reverse Impact (ASTM D 2794): Galvalume or HDG, 2x metal thickness inch-pounds, no loss of adhesion Aluminum, 1.5x metal thickness inch-pounds, no loss of adhesion Specular Gloss (ASTM D 523) 60 degrees: Typical – 20 – 35Ībrasion Resistance (ASTM D 968): 67 +/- 10 litersĬross Hatch Adhesion (ASTM D 3359): No loss of adhesi on T-Bend (ASTM D 4145): 1T – 3T with no loss of adhesion Salt Spray Resistance (ASTM B 117): Aluminum, 3000 hours, Galvalume or HDG, 1000 hours – Creep from scribe no more than 1/16”, no field blistersĬhemical/Acid Pollution Resistance (ASTM D 1308): Pass Humidity Resistance (ASTM D 2247): Galvalume or HDG, 100% RH, 2000 hours – No field blisters Aluminum, 100% RH, 3000 hours – No field blisters South Florida Exposure: Color (ASTM D 2244) – No more than 5ΔE Hunter units at 20 years Chalk (ASTM D 4214) – Rating no less than 8 at 20 years Film integrity – 20 years.Īccelerated Weathering (ASTM D 4587, ASTM G 154): 5000 Hours Chalk, per ASTM D 4214, rating of 6 or better Color, per ASTM D 2244, < 5ΔE (Hunter Units) color change. Technical Data for Kynar 500/Hylar 5000 Coating:
#Patina green kynar free#
Free material samples are available on request. These color reproductions are as accurate as modern technology will permit.
**Appearance differs for Black Aluminum and Matte Black Steel Solar Reflectance Index calculated according to ASTM E-1980.
#Patina green kynar full#
PAC-CLAD Copper Penny is a Non-Weathering finish. Cool Roof coatings contain a full 70 PVDF (Polyvinylidene fluoride) or Kynar 500 or Hylar 5000 or. PAC-CLAD Premium finishes are available from stock at a moderate extra cost.
0 kommentar(er)
